About Us
Ezy In. Ezy Out.
Ezy Anchor Screw In Tent Pegs is the product of some 25 years of camping and caravanning across and through Australia – from Fraser Island to Lawn Hill to Kakadu to Broome to Esperance to Broken Hill and beyond. After 23 years of setting up and taking down camp in our tents, hard floor camper trailer, hybrid camper and now our caravan, we felt there had to be a better way of driving and pulling tent pegs.
I became aware of people using coach screws as tent pegs without the additional support of hooks or ties and I tried this method for two years myself having experienced some severe wild and windy weather during that period, I found that they were not secure enough and would not anchor in some ground conditions resulting in during one trip we nearly lost our caravan awning over the roof!
My son, an avid camper, fisherman and outdoorsman, who also happens to be a fitter machinist and draftsperson by trade, began researching with me the design and manufacture of our Ezy Anchor , with his expertise we were able to ensure it would be Safe, Secure and Strong and would withstand the majority of environments and weather conditions.
After substantial research and 3D development of many shapes, sizes and product types, the Ezy Anchor was finally born. The design is registered with IP Australia and has attained certification.
The Ezy Anchor is made from a durable recyclable plastic with the screw pegs being positioned at an approximate 30 degree angle. The reason for our product being designed this way was to provide greater resistance in the ground when under load, whilst the signature hook shape Ezy Anchor stops guy lines being released in any weather conditions.
Safe
The colour of the Ezy Anchor has been chosen to increase visibility both in daylight and at night. It has a low profile with a countersunk screw peg washer head which means it is safer in the event of tripping as all surfaces are rounded and there is no exposed metal to cause injury to flesh.
Secure
Thanks to the unique shape developed through tireless research, trial and of course error, it ensures your guy lines do not release during severe weather.
Strong
When installed as directed in our videos and then loads are applied, it will not give way or elongate to the point of your awning, tent or pop up structure being damaged in these types of weather conditions.
The other benefit of our Ezy Anchor Screw In Tent Pegs is it makes set up and take down time extremely quick with the use of a cordless drill or impact driver, meaning the recreational time that you have come to enjoy is available in minutes and not hours.
Ezy Anchor Screw In Tent Pegs has been designed for use by any member of the family that is of an age who are safe to use a cordless drill or impact driver and therefore family members are happy helping to set up and take down camp. What could be better?
Engineering
Having spent some 23 years working with Geotechnical engineers doing project design for Marine piled structures such as wharves, commercial marinas, pontoons, jetties and piled moorings in all areas from Darwin to Port Lincoln and the Pacific Region I gained a lot of knowledge about what works where and the very extensive range of Ground Strata.
This knowledge lead to our Screw In Tent Peg design which is unique in that the thread is greater than the shaft and the pitch of the thread is perfect in providing the maximum in ground tent peg holding capacity.
We are ecstatic we were able to bring this concept to life and love receiving feedback from our customers and seeing our products in all parts of Australia and now overseas.