Christmas Special - Buy Value Pack Plus and get our Stubby Cooler for Free
This Christmas Special is only available until January 27th.
The Stubby Cooler will be shipped to you with your Starter Pack Plus package.
***Product Not Subject to Further Discount***
NEW! Now packed with even more value!
The Value Pack Plus is designed for Caravanners, Campers and others who want a bulk multipurpose pack that covers the use of the Ezy Anchors in the hard red and gravelly dirt of the Outback and also sandy loam soils such as Coastal Caravan parks.
Comprises 3 x Starter Pack
Package Includes:
3 x Driver
24 x Ezy Anchors
12 x 200mm Long Outback Screws
12 x 280mm Long Coastal Screws
3 x Storage Bag
These packs have been determined by months of personal use and testing in both types of the areas detailed above and also research throughout Central and Outback Australia.
We thank you for your purchase and wish you many years of happy use of your Ezy Anchors!
**Ezy Anchor supports Australian Business and Jobs**
*We cannot accept responsibility for damage and injuries caused by misuse.
Installation:
Take your cordless drill or impact driver
Connect the Torx driver bit to the drill/driver and secure in the chuck
Pick up your Ezy Anchor with screw in position through the Ezy Anchor
Connect your guy rope to the hook
Hold the guy rope and hook together with your guiding hand
Pick up the drill and driver in your driving hand
Insert the Torx driver into the head of the screw
Place drill in forward drilling position
Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.
Installation complete
Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position.
Removal:
With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head.
Hold the hook and guy rope in one hand, place drill in reverse and screw out.
Removal complete
*In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground. **Remember to regularly charge your drill or impact driver battery.